NOTE: The 2020 release of Intel Parallel Studio and its components require the license server manager to be at Flexlm version 11.16.4 or higher. The 2019 release of Intel Parallel Studio and its components require the license server manager to be at Flexlm version 11.15.1 or higher. The 2018 release of Intel Parallel Studio and its components require the license server manager to be at Flexlm version 11.14.1 or higher.
After the evaluation period has expired, you will be prompted to enter a license key. If you have purchased the product you will have received a new license key. Enter the purchased license key when prompted to unlock the full "unlimited" version of the software. To take advantage of complimentary email support for up to 30 days, your license key must be registered. If you purchased the product from the VMware Online store, your license key is automatically registered. If you purchased from a reseller, you need to manually register your license key in My VMware. Please consult this KB article for detailed instructions on license key registration.
IMPORTANT: When you install a new version of Workstation, the previous version will be uninstalled from your system. Therefore, we recommend that you proceed with the upgrade only if you have a new license key. Your existing virtual machines will not be affected.
Complimentary support starts when your VMware Workstation Pro license is registered. Registration takes place automatically if you purchase your product from the VMware Online store. If you purchased from a reseller, you need to register your license in My VMware. Please consult this KB article for detailed instructions on license key registration.
I had the problem because after the update to the new version I started the program from user root and this created a file in /dev/shm with root permissions and only read access for other users. After having deleted this file, the server starts now also as teamspeak user.
Royal TS/X can be downloaded and used for free without any time limit, license key or registration. This allows you to get started quickly and if you only have a small environment you can continue using Royal TS/X free of charge in "Shareware Mode".
This message will also provide a link directly to the new Kendo UI for Angular My License page with instructions for how to acquire and install a license. This license is a physical file (in .txt file format) which needs to be included in your project. Once it has been added a single CLI command will have to be executed and all of this together will remove the warning message mentioned above.
As a way to continue to offer Kendo UI for Angular through npm and make hosting our packages in a public repository sustainable going forward, we hope that license keys will be a seamless process for our users while managing trial and licensed users alike.
As a heads-up you will need to either have an active trial, or be a licensed developer, in order to get access to a license key. If, for some reason, you are neither then this page will provide an easy-to-access link to our free trial sign-up page!
Whether this is your first time starting a Kendo UI for Angular trial, you are looking to upgrade from a trial license to a developer license, or you are a licensed developer updating to the latest version of Kendo UI for Angular, the process is the same.
This works well for dev machines, but if you need this for CI servers we recommend adding the Kendo UI for Angular license key to your environment variables, as mentioned in this section of our documentation.
For trial users looking to update their license files after they have purchased a license you will have to snag another license key (tied to your purchase) and follow the same instructions again. This will replace the old trial license key and ensure your project is properly licensed.
If you are a licensed developer whose subscription has expired, and you follow the above instructions you may be met with a message that indicates that the current version of Kendo UI for Angular is not available as a part of your inactive subscription. This can be remedied by renewing your license and gaining an active subscription.
A note I want to make here is that Kendo UI for Angular licenses are still perpetual. However, they are perpetual for the versions of Kendo UI for Angular you had as a part of your subscription. So, if your subscription expired in 2020 (say December) then you would not have access to any version released in 2021.
From here I can follow the instructions that I mentioned previously and download my license file by finding this button on the page (note that you have to be logged in to a Telerik account to see this):
And that should be it! When I rebuild my application and open the developer console, I see that the message is gone, and I can continue on with developing my application. If I add more components they will just check the existing license file and will not prompt another message, so this project is now good to go for further development!
We welcome feedback on our services. By sending us feedback, you grant us a non-exclusive, perpetual, irrevocable, transferable license to use the feedback and ideas generated from the feedback without any restrictions, attribution, or compensation to you.
License to our software. Some of our services allow you to download client software. So long as you comply with these terms, we grant you a worldwide, non-exclusive, personal, and non-assignable license to download, install, and run that software, solely to access our services.
You may not copy, modify, create derivative works based upon, distribute, sell, lease, or sublicense any of our software or services. You also may not reverse engineer or decompile our software or services, attempt to do so, or assist anyone in doing so, unless you have our written consent or applicable law permits it.
No Remote Desktop license server is available. Remote Desktop Services will stop working because this computer is past its grace period and hasn't contacted at least a valid Windows Server 2008 license server. Select this message to open RD Session Host Server Configuration to use Licensing Diagnosis.
This problem occurs if a Remote Desktop license server is unavailable to provide a license to start a remote session. It can be caused by several scenarios, even though a Remote Desktop Session Host role was set up on the VM:
It's showing the problem is between proxy server and RHN. Check if there are some restrictions on the firewall or proxy itself How do I configure my firewall so that I can access the Red Hat Subscription Manager (RHSM) and Red Hat Network (RHN)?
The updated Region of Interest (ROI) feature supports multiple regional images from the same camera in live view and playback mode. You can define and enlarge multiple areas on the overview image with no selection limitations or additional licenses required.
The QVR AI Pack license empowers your NAS with QVR Smart Search (video searching) and QVR Smart Client (HDMI output). You can search for event recordings within a time period and detection area specified in the QVR Smart Client or QVR Pro Client interface. Instead of manually searching through a whole day of event videos, QVR Smart Search helps you efficiently and accurately search through hundreds of hours of video recordings from hundreds of cameras to find specific events. » Learn More
QVR Smart Search AI video search can run directly on the surveillance server without impacting system performance. It features motion detection on video recordings by querying within a specific time, area, and sensitivity.
QVR Guard is a high-availability failover management app to protect QVR Pro from system failure and to ensure uninterruptible surveillance recordings. QVR Guard features failover functionality that automatically takes over recording tasks from the QVR Pro server if an unexpected system fault or hardware failure occurs. Recording files are saved on the QVR Guard NAS until the QVR Pro system reboots and functions normally. QVR Guard provides dependable redundancy for QVR Pro, ensuring uninterrupted surveillance recordings.
I had a similar issue with server 2012, if it was set to per user mode (after the 120 days expired) no user could logon, it would say no license server was available even though the license server was active and it was specified.
That seems to be my problem. The "Overview" tab says that I am logged in as a local user. This server is set up as a workgroup member, not a domain member. What can I do to remedy this? I understand that I can't promote a licensing server to a domain controller.
When I open up the Overview I do not see an option for Deployment Overview. I only have two options on the left pane; Overview and Servers. When I click on Overview the right pane says: "There are no RD Connection Broker servers in the pool. To manage a deployment, you must add all the servers in the deployment to theserver pool..." 2b1af7f3a8