Install Mac Os X Lion App Download
Download File ---> https://ssurll.com/2sYcBY
I'm trying to reinstall OS X 10.7 Lion on a 2009 iMac. Going the usual route for an internet installation always ends up with the message "This item is not available". So I want to download the Lion installer and put it on a USB flash drive. It used to be possible to download the old OS installers from the App Store, but it does not show up there, even in the list of my Purchased apps. In fact, none of the old OD installers show up there, even MacOS 10.14. How can I download the Lion installer?
Thanks for this detailed explanation. I'm actually trying to help a neighbour with this problem, so it will be a couple of days before I can get to her home to try your instructions. She was having problems with strange things happening on her system, so I thought the best way to fix them was to reinstall Lion, which was what was currently running on her old iMac. That didn't work, so I next tried to use an El Capitain installer, which I already had on a USB flash drive. That didn't work either, so I then tried to just reboot without reinstalling, but now, even a straight reboot won't go back to her old Lion OS - it keeps wanting to do an internet install of El Capitain.
Downloading and using different Mac OS installers is very common for troubleshooting purposes, for IT staff and admins, and for tinkerers. This article will discuss where to download and access installers for macOS Ventura 13, MacOS Monterey 12, macOS Big Sur 11, macOS Catalina, MacOS Mojave, MacOS High Sierra, macOS Sierra, Mac OS X El Capitan, OS X Yosemite, OS X Mavericks, Mac OS X Mountain Lion, Mac OS X Lion, Mac OS X Snow Leopard, Mac OS X Leopard, Mac OS X Tiger, and others too.
For earlier versions of Mac OS X, including Mac OS X Mavericks 10.9, Mac OS X Mountain Lion 10.8, Mac OS X Lion 10.7, Mac OS X Snow Leopard 10.6, Mac OS X Leopard 10.5, Mac OS X Tiger 10.4, and before, the process to obtain those installers differs a bit.
Another option is to peruse the Apple Vintage Software collection at Archive.org which may have image files of older system restore disks and other older system software, just beware that archive.org is not an official distributor of Apple software so appropriate precautions should be taken and only download from there at your own risk.
Apple has kept OS X 10.7 Lion and OS X 10.8 Mountain Lion available for customers who have machines limited to the older software, but until recently, Apple was charging $19.99 to get download codes for the updates.
Mavericks was free to download, and Apple has not charged for Mac software since then outside of the legacy Lion and Mountain Lion updates. Apple also used to have OS X 10.6 Snow Leopard available for a fee, but it is no longer purchasable.
If I look in the app store it doesn't appear that I purchased Lion (since it came pre-installed). I am aware of the internet recovery option but am looking for a way to download the file now so I can recover later without an internet connection.
You can use the Recovery partition or Internet Recovery to download the full installer. The basic method is, tell it to re-install on an external drive, let it download, interrupt it before it reboots your system, then you can grab the DMG file and write it to a USB drive so that you'll have a full (no internet required) installer when you need it.
You can use this to your benefit by rebooting your Mac into recovery and connect a USB drive. Go through the steps to link your Apple ID to that Mac for a Lion reinstall. Choose the external drive for the install. You should be able to catch the process at a reboot and save the 10.7.2 installer for later. Worst case is you miss it and the system deleted the installer application. Just open the App Store and hold option when selecting Purchased. You can generally re-download things once the store knows you get a copy of Lion.
I created a USB stick with Lion DiskMaker which seems to be the best method for USB. For DVDs, if you browse inside the Lion Installer you should find installESD.dmg. According to internet sources, burning this file to DVD creates a bootable disk (I have not tried this approach).
Download the the latest version of Dia for Mac OS X 10.8 Mountain Lion, Mac OS X 10.7 Lion and 10.6 Snow Leopard.If you're using Mac OS X 10.6 Snow Leopard, please install X11. It is available from the "Optional Installs" of your Mac OS X Install DVD.
We previously outlined how to create your own OS X install drive when OS X Lion was released, and the process for Mountain Lion is for the most part the same. However, when following the procedure for Lion you might run into a snag that will prevent the drive from being created. Therefore, to create a standalone USB or optical media install drive for OS X 10.8 Mountain Lion, do this:
When Disk Utility creates the drive in this manner, all files on it will be erased and replaced with the restored data; however, if you initially partitioned the drive (see step 6 above), then you can still use the drive's secondary volume for other purposes in addition to being a Mountain Lion install source.
After trying to install OS X El Capitan onto my hard drive, I've come across a problem. When it asks me to sign into my Apple ID I do with the correct information. It then says that my username or password is incorrect. I know this is not the case because I have reset my password and tested it by signing into the App Store on my phone. Anyone else have this problem? Any fixes? Thanks.
Same problem here. I just erased the disk and tried instaling from the recovery partition, and it prompts for my Apple ID & pw. Keeps telling me pw is wrong. I turned off two-factor auth thinking that was the problem, no luck. Changed pw 3 times already and each time the installer tells me pw is wrong!
Apple's Xcode Developer Tools (version 14.1 or later for Ventura, 13.1 or later for Monterey, 12.2 or later for Big Sur, 11.3 or later for Catalina, 10.0 or later for Mojave, 9.0 or later for High Sierra, 8.0 or later for Sierra, 7.0 or later for El Capitan, 6.1 or later for Yosemite, 5.0.1 or later for Mavericks, 4.4 or later for Mountain Lion, 4.1 or later for Lion, 3.2 or later for Snow Leopard, or 3.1 or later for Leopard), found at the Apple Developer site, on your Mac operating system installation CDs/DVD, or in the Mac App Store. Using the latest available version that will run on your OS is highly recommended, except for Snow Leopard where the last free version, 3.2.6, is recommended.
Older versions are found at the Apple Developer site, or they can be installed from within Xcode back to version 4. Users of Xcode 3 or earlier can install them by ensuring that the appropriate option(s) are selected at the time of Xcode's install ("UNIX Development", "System Tools", "Command Line Tools", or "Command Line Support").
The easiest way to install MacPorts on a Mac is by downloading the pkg or dmg for Ventura, Monterey, Big Sur, Catalina, Mojave, High Sierra, Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion, Lion, Snow Leopard, Leopard or Tiger and running the system's Installer by double-clicking on the pkg contained therein, following the on-screen instructions until completion.
This procedure will place a fully-functional and default MacPorts installation on your host system, ready for usage. If needed your shell configuration files will be adapted by the installer to include the necessary settings to run MacPorts and the programs it installs, but you may need to open a new shell for these changes to take effect.
If on the other hand you decide to install MacPorts from source, there are still a couple of things you will need to do after downloading the tarball before you can start installing ports, namely compiling and installing MacPorts itself:
If you are developer or a user with a taste for the bleeding edge and wish for the latest changes and feature additions, you may acquire the MacPorts sources through git. See the Guide section on installing from git.
If you already have MacPorts installed and have no restrictions to use the rsync networking protocol (tcp port 873 by default), the easiest way to upgrade to our latest available release, 2.8.1, is by using the selfupdate target of the port(1) command. This will both update your ports tree (by performing a sync operation) and rebuild your current installation if it's outdated, preserving your customizations, if any.
Help on a wide variety of topics is also available in the project Guide and through our Trac portal should you run into any problems installing and/or using MacPorts. Of particular relevance are the installation & usage sections of the former and the FAQ section of the Wiki, where we keep track of questions frequently fielded on our mailing lists.
After you close the browsers, the uninstaller continues automatically until the uninstallation is complete. When you see the message notifying you that the uninstallation succeeded, click Done.
Bookmark or print this page so that you can use the rest of these instructions after you close your browser. Close all browsers and other applications that use Flash Player, including instant messaging applications, SWF files, and projectors (EXE files that play SWF files). Otherwise, the uninstaller cannot finish (even though it appears to finish).
This directory contains binaries for a base distribution and packages to run on macOS. Releases for old Mac OS X systems (through Mac OS X 10.5) and PowerPC Macs can be found in the old directory.Note: Although we take precautions when assembling binaries, please use the normal precautions with downloaded executables.
Package binaries for R versions older than 3.2.0 are only available from the CRAN archive so users of such versions should adjust the CRAN mirror setting ( -archive.r-project.org) accordingly.R 4.2.2 "Innocent and Trusting" released on 2022/10/31 Please check the integrity of the downloaded package by checking the signature: pkgutil --check-signature R-4.2.2.pkg in the Terminal application. If Apple tools are not avaiable you can check the SHA1 checksum of the downloaded image: openssl sha1 R-4.2.2.pkgLatest release:R-4.2.2-arm64.pkg (notarized and signed)SHA1-hash: c3bb657ca6912b9b98e254f63434a365da26848f(ca. 86MB) for M1 and higher Macs only! R 4.2.2 binary for macOS 11 (Big Sur) and higher, Apple silicon arm64 build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 for Apple silicon Macs (M1 and higher), Tcl/Tk 8.6.12 X11 libraries and Texinfo 6.8. Important: this version does NOT work on older Intel-based Macs - see below for Intel version.Note: the use of X11 (including tcltk) requires XQuartz (version 2.8.1 or later). Always re-install XQuartz when upgrading your macOS to a new major version.This release uses Xcode 13.1 and experimental GNU Fortran 12 arm64 fork. If you wish to compile R packages which contain Fortran code, you may need to download GNU Fortran for arm64 from -project.org/tools. Any external libraries and tools are expected to live in /opt/R/arm64 to not conflict with Intel-based software and this build will not use /usr/local to avoid such conflicts (see the tools page for more details). R-4.2.2.pkg (notarized and signed)SHA1-hash: 99b8d184f855e630ac950ca4e62cb7fc9a1f7b2e(ca. 87MB) for Intel Macs R 4.2.2 binary for macOS 10.13 (High Sierra) and higher, Intel 64-bit (older Macs) build, signed and notarized package. Contains R 4.2.2 framework, R.app GUI 1.79 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 6.7. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed (version 2.7.11 or later) since it is no longer part of macOS. Always re-install XQuartz when upgrading your macOS to a new major version.This release supports Intel Macs, but it is also known to work using Rosetta2 on M1-based Macs. For native Apple silicon arm64 binary see above.Important: this release uses Xcode 12.4 and GNU Fortran 8.2. If you wish to compile R packages from sources, you may need to download GNU Fortran 8.2 - see the tools directory. NEWS (for Mac GUI)News features and changes in the R.app Mac GUIMac-GUI-1.78.tar.gz SHA1-hash: 23b3c41b7eb771640fd504a75e5782792dddb2bcSources for the R.app GUI 1.78 for macOS. This file is only needed if you want to join the development of the GUI (see also Mac-GUI repository), it is not intended for regular users. Read the INSTALL file for further instructions.Note: Previous R versions for El Capitan can be found in the el-capitan/base directory.Binaries for legacy OS X systems: R-3.6.3.nn.pkg (signed) SHA1-hash: c462c9b1f9b45d778f05b8d9aa25a9123b3557c4 (ca. 77MB) R 3.6.3 binary for OS X 10.11 (El Capitan) and higher, signed package. Contains R 3.6.3 framework, R.app GUI 1.70 in 64-bit for Intel Macs, Tcl/Tk 8.6.6 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", they are only needed if you want to use the tcltk R package or build package documentation from sources. R-3.3.3.pkgMD5-hash: 893ba010f303e666e19f86e4800f1fbfSHA1-hash: 5ae71b000b15805f95f38c08c45972d51ce3d027(ca. 71MB)R 3.3.3 binary for Mac OS X 10.9 (Mavericks) and higher, signed package. Contains R 3.3.3 framework, R.app GUI 1.69 in 64-bit for Intel Macs, Tcl/Tk 8.6.0 X11 libraries and Texinfo 5.2. The latter two components are optional and can be ommitted when choosing "custom install", it is only needed if you want to use the tcltk R package or build package documentation from sources.Note: the use of X11 (including tcltk) requires XQuartz to be installed since it is no longer part of OS X. Always re-install XQuartz when upgrading your OS X to a new major version. R-3.2.1-snowleopard.pkgMD5-hash: 58fe9d01314d9cb75ff80ccfb914fd65SHA1-hash: be6e91db12bac22a324f0cb51c7efa9063ece0d0(ca. 68MB)R 3.2.1 legacy binary for Mac OS X 10.6 (Snow Leopard) - 10.8 (Mountain Lion), signed package. Contains R 3.2.1 framework, R.app GUI 1.66 in 64-bit for Intel Macs.This package contains the R framework, 64-bit GUI (R.app), Tcl/Tk 8.6.0 X11 libraries and Texinfop 5.2. GNU Fortran is NOT included (needed if you want to compile packages from sources that contain FORTRAN code) please see the tools directory.NOTE: the binary support for OS X before Mavericks is being phased out, we do not expect further releases! The new R.app Cocoa GUI has been written by Simon Urbanek and Stefano Iacus with contributions from many developers and translators world-wide, see "About R" in the GUI.Subdirectories: tools Additional tools necessary for building R for Mac OS X:Universal GNU Fortran compiler for Mac OS X (see R for Mac tools page for details). base Binaries of R builds for macOS 10.13 or higher (High Sierra), Intel build contrib Binaries of package builds for macOS 10.13 or higher (High Sierra), Intel build big-sur-arm64 Binaries for macOS 11 or higher (Big Sur) for arm64-based Macs (aka Apple silicon such as the M1 chip) el-capitan Binaries of package builds for OS X 10.11 or higher (El Capitan build) mavericks Binaries of package builds for Mac OS X 10.9 or higher (Mavericks build) old Previously released R versions for Mac OS X You may also want to read the R FAQ and R for Mac OS X FAQ. For discussion of Mac-related topics and reporting Mac-specific bugs, please use the R-SIG-Mac mailing list.Information, tools and most recent daily builds of the R GUI, R-patched and R-devel can be found at -project.org/. Please visit that page especially during beta stages to help us test the macOS binaries before final release!Package maintainers should visit CRAN check summary page to see whether their package is compatible with the current build of R for macOS.Binary libraries for dependencies not present here are available from -project.org/bin and corresponding sources at -project.org/src.Last modified: 2022/10/31, by Simon Urbanek 2b1af7f3a8